Solution Summary: Autonomous Drywall Finishing Robotic System
Description:
Finishing drywall can be a repetitive task that can raise the risk of ergonomic injury, falls when working at height, as well as generate large amounts of dust that may contain high levels of contaminants, including crystalline silica, creating a health hazard for everyone in the vicinity. An autonomous drywall finishing robot is an engineering control that automatically performs mudding and sanding after it scans and 3D maps the surface areas to be worked on. It eliminates potential exposures to the hazards of falls from elevation, ergonomic stressors and airborne contaminants associated with traditional drywall finishing.
Manual drywall finishing can create risks to hazards from strenuous repetitive motions, working at height, and exposure to airborne fine particulates. An autonomous drywall finishing robot, such as the Canvas (figure 1), automates the mudding, taping, and sanding portions of the drywall finishing process. It is a robot that features a sprayer, lift station, telescopic mechanical arm, and vacuum sanding system. The arm contains an image sensor that first generates a 3D map of the surface. Those spatial data are then calculated to provide an optimum drywall finishing process with a single sprayed coat and sanding pass for the job. This robotic system can be operated at a distance by a remote, which requires manufacturer training (figure 2).
For more information on technical specifications, please visit the manufacturer link under ‘Availability’ section.
![Side image of Canvas machine arm attached to drywall and actively sanding.](https://medianew.dpr.com/assets/blog/GT7-Canvas-Machine.jpg)
Figure 1. The Canvas robotic system performing a sanding operation. (Photo courtesy of Canvas)
![](/gallery/image/0canvasworkeroperate.jpg)
Figure 2. A trained worker operating the Canvas robotic system via remote. (Photo courtesy of Canvas)
Risks Addressed:
Manual sanding drywall joints and other wall surfaces can generate levels of total and respirable dust that exceed recommended limits. Drywall material can contain silica. Crystalline silica dust exposure may cause silicosis or lung scarring with prolonged exposure. Silicosis is an incurable, progressive, sometimes fatal, disease. OSHA has a Permissible Exposure Limit for exposure to respirable crystalline silica (RCS) of 50 micrograms per cubic meter of air (µg/m3) as an 8-hour time weighted average. RCS exposure has also been associated with lung cancer, kidney disease, autoimmune disorders, and chronic obstructive pulmonary disease.
Manual sanding requires stressful hand and wrist exertions. Stressful hand and wrist activities can cause muscle strains; tendonitis, which is inflammation of elbow and wrist tendons; and carpal tunnel syndrome, which is compression of a wrist nerve, resulting in finger numbness and loss of hand strength.
Using scissor lifts, ladders, or rolling scaffolds during drywall finishing can increase the chance of a fall leading to an injury or even death. Fractures are the most common injuries associated with falling from a ladder, followed by strains, sprains, and abrasions.
How Risks are Reduced:
Typically, drywall seams are covered from floor to ceiling, which can lead to work on mobile scissor lifts, ladders, or rolling scaffolds raising the risk of ergonomic injury. The Canvas allows workers to pilot Canvas up to 17 feet high eliminating the need for workers to use ladders, scissor lifts, or scaffolds.
According to the manufacturer, the Canvas captures 99.9% of the dust produced by sanding as well as minimize cleanup, thereby reducing worker exposure to respirable crystalline silica. Canvas also helps make the work ergonomically safer by eliminating heavy lifting of a sanding machine, awkward positions during drywall installation, and stress injuries from repetitive physical activity.
Effects on Productivity:
Per the manufacturer, the Canvas robotic provides high-quality finishes every time and reduces the typical finishing cycle times from seven days down to two.
Additional Considerations:
As with any construction tools and equipment, users should follow the manufacturer's safety recommendations and comply with any applicable local, state or federal regulations.
While most of the work is done autonomously, workers should be aware of the distance between them and the robot to avoid catching and dragging-related risks. Workers (end-users) should be trained to detect system malfunction that may lead to accidents.
Contributors:
Jean Christophe Le, MPH - CPWR The Center for Construction Research and Training
Availability
DPR Construction
To obtain information, visit Canvas