A grounding mat is an engineering control that reduces the risk of electrocution for operators who work on the ground. Consisting of a flexible sheet (vinyl/polyester) and a grid of conductors (e.g. copper wire) connected to a grounded object (i.e. a ground rod), this solution creates an equipotential zone that protects workers who are standing on it from “step and touch potentials.” The Hierarchy of Control (HOC), a well-known framework to evaluate the performance of safety solutions in Occupational Safety and Health (OSH) research (Wakefield et al. 2014), consists of control measures with five levels of effectiveness: (1) Elimination, (2) Substitution, (3) Engineering Controls, (4) Administrative Controls, (5) Personal Protective Equipment; with elimination being the most effective. At the third level, engineering controls “use safeguarding technology to place a barrier to keep a hazard from reaching workers” (Zhao et al. 2015). Grounding mats can be considered an engineering control solution due to their ability to keep electrical current away from workers’ bodies.

A grounding mat provides an equipotential zone against electrical shock through a flexible sheet with a continuous conductive wire attached to a ground point on electrical equipment (McKelvy 2002). Workers who operate on the ground near de-energized power lines, pad-mounted transformers and switches, lift trucks, and mechanical equipment face possible hazards from step and touch potentials from induced voltage, lightning, or unexpected re-energization. Touch potential is defined as the voltage difference between the energized grounded object and the feet of a person who touches that object. Step potential is the voltage difference between the energized grounded object and the foot of a person who is near an energized grounded object.

While touch potential (which is almost equal to the full voltage of object) is likely to result in more serious injury, a worker could be injured simply by being near an energized object due to step potential. Creating an equipotential area near electrical sources in this situation is the best way to protect workers. According to OSHA, in an equipotential zone, the electrical potential of an energized object and that of the worker are approximately identical. The grounding mat is a high-ampacity area (12) consisting of aluminum or copper braid (10) in a crosshatched pattern within the vinyl/polyester fabric (11). To ensure that the mat is of one potential, all braids are connected to the same source of power. On the other end, braids are connected to a node at the edge of the mat that should be connected to a grounding conductor (i.e., grounding rod) at the construction site. While working with grounded equipment connected to electricity, workers should stand on a ground mat to protect themselves.

Some features of grounding mats could have effects on worker productivity.  For example, there are different types of mats available for use during rain, snow and ice conditions which can improve productivity because they are also slip resistant.

• The grounding mat must be kept clean and protected, to avoid corrosion, wear and tear.
• It is possible to connect two or more ground mats in series to expand protection to a broader area.
• The grounding mat must be bonded to the equipment being worked on with a safe and reliable ground cable assembly.
• Grounding mats are easy to clean (a standard hose pressure can be used). But it is important to let them dry completely before storing them again.
• The grounding mat offers a temporary protection measure while performing work with equipment connected to electricity.

Behzad Esmaeili, Ph.D. - University of Nebraska- Lincoln
Pouya Gholizadeh - University of Nebraska- Lincoln
Sogand Hasanzadeh - University of Nebraska- Lincoln
Ana Clara Carvalho - University of Nebraska- Lincoln

• Electrical
  • Cut, shape, place and install conduit and wire trays
    • Electrical shocks, burns and/or electrocution
  • Install and maintain electrical control systems
    • Electrical shocks, burns and/or electrocution
  • Install and maintain fixtures, lights, motors and pumps
    • Electrical shocks, burns and/or electrocution
  • Install and maintain temporary wiring systems on construction sites
    • Electrical shocks, burns and/or electrocution
  • Install interior wiring systems
    • Electrical shocks, burns and/or electrocution
  • Pull wire through conduits
    • Electrical shocks, burns and/or electrocution
  • Splice and connect wiring systems
    • Electrical shocks, burns and/or electrocution
  • Work with or remove old wiring
    • Electrical shocks, burns and/or electrocution